HOME > Products > Tachometers / Counters > Panel Mount Tachometers > DT-5TS/5TL Series|DT-5TS/DT-5TL Series

Tachometers / Counters

DT-5TS/DT-5TL Series




 
DT-5TS/DT-5TL Series
Low-Priced Tachometers

This is a new type of panel-mount meter equipped with dual sub-indicators, having excellent waterproof properties (equivalent to IP66) and simple setting features at a low price. It accepts input signals from various devices such as rotary encoders, magnetic sensors, and line drivers (basic input: DT-5TS, differential input: DT-5TL). Provided with various functions including calibration, memory, and prescaling.

 
Features
Excellent waterproof properties (equivalent to IP66)
Allows the device to be used in environments where a large quantity of water is used, such as places where pharmaceuticals or other products are manufactured.

Compatible with various input signals
The tachometer accepts input signals from various devices such as rotary encoders, magnetic sensors, and line drivers.
1. Basic input: for various sensors such as rotary encoders and magnetic sensors
2. Differential input: for input signals from line drivers for servo motors and other such devices

Provided with various functions including calibration, memory, and prescaling

Capable of accepting high-speed input at 100 kHz

Reduction of approximately 35% compared to our previous models
The space-saving design, DIN W96 x H48 x D92 mm (panel inside 83 mm), allows combination with a compact machine without difficulty.
 
Measurement modes
RPM or Rate Measurement Mode The device serves as a tachometer or a speedometer, and indicates values proportional to the input.
Elapsed Time Measurement/Monitoring Mode The device indicates values inversely proportional to the input. The values are either displayed by the hour, minute, and second, or displayed in units of 1/100 seconds.
Suited for indicating the transit time on conveyor belts or the like.
Process Time Measurement Mode The device measures the duration for which the input signal stays ON or OFF. For example, it is possible to measure the time for various processes.
Flow Rate Measurement Mode In combination with a pulse-output flow meter, the device indicates the instantaneous flow rate according to the predetermined quantity of flow per pulse.


Operational Modes RPM or Rate Measurement; Elapsed Time Measurement/Monitoring; Process Time Measurement; Flow Rate Measurement
Input Signals Contact input; Open collector input; Voltage pulse input (square wave); Voltage pulse input (sine wave)
Power Source AC85-264V
Functions Prescaling function; Calibration function; Auto-zero function; Sub-indicators; Moving-average indication; Sensor supply voltage 12V


Specifications   Dimensional Drawing