HOME > Products > Force Gauges and Test Stands > Accessories / Options

Force Gauges and Test Stands

Accessories / Options

Accessories / Options

Force Gauge Attachment: Film Grips Available in two types: 6FC-20 (for M6 screw attachment) and 4FC-20 (for M4 screw attachment). Width is 20 mm, opening is 0–2 mm, and mass is approx. 75 g. Used for thin film-like test pieces.

Force Gauge Attachment: Leak Test Fixture Stroke: 110 mm, Tray inner dimensions: W266 × 172 mm. Used for leak tests to examine airtightness.

Force Gauge Attachment: Tape Grips Available in one type: GC-60. Mass is approx. 170 g (part attached to the force gauge), and approx. 440 g (part attached to the stand). The self-tightening mechanism even keeps deformable materials secure. A fixture suitable for tensile tests on rubber, tape, etc.

Force Gauge Attachment: Jacob’s Chuck Grips Available in one type: GC-20. Chucking diameter is 0.5–5 mm; mass is approx. 160 g (part attached to the force gauge), and approx. 430 g (part attached to the stand). A tensile test fixture for round bar shaped test pieces, which can also be used with round bar shaped jigs.

Force Gauge Attachment: Small Chucks Available in two types: 6SC-3 (for M6 screw attachment) and 4SC-3 (for M4 screw attachment). Width is 3 mm, opening is 0–2 mm, and mass is approx. 25 g. Used for thin test pieces.

Force Gauge Attachment: Solder Test Jigs Adapter plate dimensions: 200×150 mm; X-Y table travel distance: ±12.5 mm. Used for solder joint strength tests.

Force Gauge Attachment: Spool Grips Available in one type: GC-40. Maximum acceptable wire diameter is 0.5 mm; spool diameter is 10 mm; and mass is approx. 90 g (part attached to the force gauge), and approx. 370 g (part attached to the stand). A fixture suitable for tensile tests on thread, string, rope, etc. The friction of the reeled test piece on the cylinders bears the tensile force, thereby preventing the test piece from becoming cut.

Force Gauge Attachment: Wedge Grips Available in one type: GC-50. Width is 8 mm; opening is 4 mm; and mass is approx. 200 g (part attached to the force gauge), and approx. 470 g (part attached to the stand). A fixture for tensile tests with a self-tightening wedge mechanism, where the test piece can be easily attached and removed.

Force Gauge Attachment: Film Grips Available in one type: GC-2-5. Width is 50 mm; and mass is approx. 150 g (part attached to the force gauge), and approx. 420 g (part attached to the stand). A tensile test fixture suited for thin film-like test pieces (maximum thickness: 2 mm).