HOME > Products > Force Gauges and Test Stands

Force Gauges and Test Stands

フォースゲージ・試験スタンド

Force Gauges and Test Stands

Digital Force Gauges

FGRT-□ Series Hardness Tester Digital Force Gauges Rheo Tester
FGRT-□ Series Hardness Tester Digital Force Gauges Rheo Tester FGRT-□ Series digital force gauges measure the internal reaction force that occurs when an external force is applied to an object, rather than measuring the load. The measuring range is from 10N to 100N. A built-in comparator determines and indicates the accepted or rejected result. The memory function allows the storage of 1,000 sets of measurement data. A USB interface is provided for connection to a computer.

FGPX Series High-performance Digital Force Gauges with Enhanced Communication Functions
FGPX Series High-performance Digital Force Gauges with Enhanced Communication Functions The measuring range is from 2 N to 1,000 N. A high-performance digital force gauge (push-pull gauge) with enhanced data management and communication functions. The enhanced functions include: compatibility with Digimatic signals, LEDs to indicate the results, a hold function for holding the indicated value, and a tare deduction setting function. A USB interface is provided for connection to a computer.

FGPX-H Series High-performance Heavy-duty Digital Force Gauges with Enhanced Communication Functions
FGPX-H Series High-performance Heavy-duty Digital Force Gauges with Enhanced Communication Functions The measuring range is from 2,500N to 5,000N. A high-performance digital force gauge (push-pull gauge) with enhanced data management and communication functions. The enhanced functions include: compatibility with Digimatic signals, LEDs to indicate the results, a hold function for holding the indicated value, and a tare deduction setting function. A USB interface is provided for connection to a computer.

FGP Series High-performance Digital Force Gauges
FGP Series High-performance Digital Force Gauges A series of high-performance digital force gauges (push-pull gauges) with capacities ranging from 2N to 1,000N, which can measure pressing force, tensile force, peel force, etc. A USB interface is provided for connection to a computer. In addition, the specialized add-in software TORIEMON USB enables data transfer to Excel and allows data editing on a PC.

FGJN Series Economic Digital Force Gauges
FGJN Series Economic Digital Force Gauges An affordable series of digital force gauges (push-pull gauges) with capacities ranging from 20N to 500N, which are capable of simple measurement of pressing force, tensile force, peel force, etc. Provided with various useful functions including: a Reverse function, which turns the displayed numerical value and unit upside down with the press of a button, and a Unit Switching function, which can change the unit between “N” and “kg” with the press of a button. This series has acquired the CE mark, and is scheduled to be compliant with the RoHS directive in 2013.

Mechanical Force Gauges

MF Series Mechanical Force Gauges
MF Series Mechanical Force Gauges An easy-to-handle mechanical force gauge (push-pull gauge), which can be used without power supply. Measurement in both directions of pulling and pushing is possible. Solidly built with an aluminum die-cast case. A friction pointer mechanism is used to indicate peak values. Note: When using this product with a force gauge stand, an adapter plate (optional) is required. Please contact us.

Desktop Test Stands

FGS-TV Series Desktop Test Stands
FGS-TV Series Desktop Test Stands A high-performance, high-accuracy, desktop test stand made up of a digital force gauge (push-pull gauge), a motorized measurement stand, and specialized add-in software. A variety of measurement modes (peeling test, breaking test, load sensing test, compression/tensile test, and reciprocating test) is a standard feature. The data can be transferred to a personal computer through a USB port, and selection of the movement mode can be operated from the computer.

Motorized Test Stands for Force Gauges

FGS-50E Motorized Test Stands for Force Gauges (Vertical Type)
FGS-50E Motorized Test Stands for Force Gauges (Vertical Type) With a long stroke, it can handle a wide variety of workpieces. Four operational modes are provided: Manual, Jog, 1-Cycle, and Repeated Reciprocation. Two travel speed ranges are available to be selected from: low-speed type (6 – 108 mm/min) and high-speed type (20 – 600 mm/min). Easy to see and to operate with an LCD. Accepts a wide range of voltage (AC 100 – 240V).

FGS-VC Series Motorized Test Stands for Force Gauges (Vertical Type)
FGS-VC Series Motorized Test Stands for Force Gauges (Vertical Type) By changing digital force gauges (push-pull gauges), loads ranging from 2 N to 2,500 N can be measured with this force gauge stand. The USB interface and specialized FGT-VC add-in software, which is available free of charge, allow the stand carriage moving distance and load data to be easily transferred to a computer and displayed as a graph.

FGS-50XB-L/H Motorized Test Stands for Digital Force Gauges (Horizontal Type)
FGS-50XB-L/H Motorized Test Stands for Digital Force Gauges (Horizontal Type) Various movement modes are available for the digital force gauge (push-pull gauge), e.g. jogging and repeated reciprocation, according to the purpose of measurement and the intended use of the test object. Five positions and stopping times are programmable. An analog output enables a connection to a pen recorder to record the displacement. Provided with an emergency stop switch to support a safe test environment.

Manual Test Stands for Force Gauges

FGS-HB Series Manual Test Stands for Force Gauges (Vertical Type / Handle Operated)
FGS-HB Series Manual Test Stands for Force Gauges (Vertical Type / Handle Operated) By changing force gauges (push-pull gauges), loads ranging from 2 to 2,500 N can be measured with this force gauge stand. One turn of the handle moves the carriage approximately 1.33 mm (FGS-100HB), thus measurement can be performed with minute movements. Operability has been improved with an LCD on the operation panel.

FGS-5S Manual Test Stands for Force Gauges (Vertical Type / Lever Operated)
FGS-5S Manual Test Stands for Force Gauges (Vertical Type / Lever Operated) Loads up to 200 N can be measured with this force gauge stand. The height can be adjusted to 3 levels (40mm, 70mm, and 100mm). It is portable with a compact and lightweight design (10kg). The lever is perfect for performing quick measurements.

FGS-50L Manual Test Stands for Force Gauges (Vertical Type / Lever Operated)
FGS-50L Manual Test Stands for Force Gauges (Vertical Type / Lever Operated) Loads up to 500 N can be measured with this force gauge stand. The height can be adjusted to 8 levels in increments of 30mm. With a compact and lightweight design (15kg), it can be used almost anywhere. The lever is perfect for performing quick measurements.

FGS-50H Manual Test Stands for Force Gauges (Vertical Type / Handle Operated)
FGS-50H Manual Test Stands for Force Gauges (Vertical Type / Handle Operated) Loads up to 500 N can be measured with this force gauge stand. The height can be adjusted to 6 levels in increments of 30mm. With a compact and lightweight design (15kg), it can be used almost anywhere. The handle enables minute movement of the force gauge.

Accessories / Options

Force Gauge Attachment: Film Grips
Force Gauge Attachment: Film Grips Available in two types: 6FC-20 (for M6 screw attachment) and 4FC-20 (for M4 screw attachment). Width is 20 mm, opening is 0–2 mm, and mass is approx. 75 g. Used for thin film-like test pieces.

Force Gauge Attachment: Leak Test Fixture
Force Gauge Attachment: Leak Test Fixture Stroke: 110 mm, Tray inner dimensions: W266 × 172 mm. Used for leak tests to examine airtightness.

Force Gauge Attachment: Tape Grips
Force Gauge Attachment: Tape Grips Available in one type: GC-60. Mass is approx. 170 g (part attached to the force gauge), and approx. 440 g (part attached to the stand). The self-tightening mechanism even keeps deformable materials secure. A fixture suitable for tensile tests on rubber, tape, etc.

Force Gauge Attachment: Jacob’s Chuck Grips
Force Gauge Attachment: Jacob’s Chuck Grips Available in one type: GC-20. Chucking diameter is 0.5–5 mm; mass is approx. 160 g (part attached to the force gauge), and approx. 430 g (part attached to the stand). A tensile test fixture for round bar shaped test pieces, which can also be used with round bar shaped jigs.

Force Gauge Attachment: Small Chucks
Force Gauge Attachment: Small Chucks Available in two types: 6SC-3 (for M6 screw attachment) and 4SC-3 (for M4 screw attachment). Width is 3 mm, opening is 0–2 mm, and mass is approx. 25 g. Used for thin test pieces.

Force Gauge Attachment: Solder Test Jigs
Force Gauge Attachment: Solder Test Jigs Adapter plate dimensions: 200×150 mm; X-Y table travel distance: ±12.5 mm. Used for solder joint strength tests.

Force Gauge Attachment: Spool Grips
Force Gauge Attachment: Spool Grips Available in one type: GC-40. Maximum acceptable wire diameter is 0.5 mm; spool diameter is 10 mm; and mass is approx. 90 g (part attached to the force gauge), and approx. 370 g (part attached to the stand). A fixture suitable for tensile tests on thread, string, rope, etc. The friction of the reeled test piece on the cylinders bears the tensile force, thereby preventing the test piece from becoming cut.

Force Gauge Attachment: Wedge Grips
Force Gauge Attachment: Wedge Grips Available in one type: GC-50. Width is 8 mm; opening is 4 mm; and mass is approx. 200 g (part attached to the force gauge), and approx. 470 g (part attached to the stand). A fixture for tensile tests with a self-tightening wedge mechanism, where the test piece can be easily attached and removed.

Force Gauge Attachment: Film Grips
Force Gauge Attachment: Film Grips Available in one type: GC-2-5. Width is 50 mm; and mass is approx. 150 g (part attached to the force gauge), and approx. 420 g (part attached to the stand). A tensile test fixture suited for thin film-like test pieces (maximum thickness: 2 mm).